Gecko & HydroQuip Hot Tub Heaters
Browse our large range of hot tub heaters and elements. If you can't find the brand you need, please send us an email: sales@dolphinpools.co.uk
Full Description
Gecko 2kW Flow Thru Heater SSPA 
| Type of product: | Heater assembly |
| Make and Model: | Gecko replacement, has also been made by Thermocore and RMF in the past. Most common part number is C2200-0800ET. |
| Power: | Volts: 230 Hz: 50 KW: 2.0 Amps: 8-8.5 |
| Specification | Sensor compatibility: Gecko & Hydroquip Material spec: Required flow rate: Set by pressure switch Flow detection: 2-PSI Tecmark pressure switch |
| Compatible with: | Gecko SSPA control box (the small white one). Found on tubs from LA Spa, Dimension One, Arctic Spas, Coyote Spas, Sunrise Spa, Hot Spot and more... |
| Connections / Fixings: | Usually held in with a double aluminum brace. Hi limit sensor pouch on underside. 2" white plastic female sockets to connect to plumbing. You will need to re-connect your pressure switch also. |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | If your heater looks the same as this one it most probably is but contact us if you need further help. |
Gecko 3.6kW Flow Thru Heater MSPA 
| Type of product: | Heater assembly |
| Make and Model: | Gecko replacement, has also been made by Thermocore and RMF in the past. Most common part number is CC2360-0601ET. |
| Power: | Volts: 230 Hz: 50 KW: 3.6 Amps: 14.4 |
| Specification | Sensor compatibility: Gecko & Hydroquip probe and ribbon style Material spec: Required flow rate: Set by pressure switch Flow detection: 2-PSI Tecmark pressure switch |
| Compatible with: | Gecko MSPA control box (the big blue one). Also replaces Canspa heater SN 3636603051350 |
| Connections / Fixings: | Usually held in the blue plastic moulding of the control box at the bottom of the Spa pack. Hi limit sensor pouch sits on top of the heater, also known to be used with the ribbon style hi-limit. 2" white plastic female sockets to connect to plumbing. You will need to re-connect your pressure switch also. |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | If your heater looks the same as this one it most probably is but contact us if you need further help. |
Gecko or HydroQuip 2.5KW Flow Thru Heater 
| Type of product: | Heater assembly |
| Make and Model: | Thermcore, Gecko, HydroQuip, RMF... C2250-0802A, |
| Power: | Volts: 230 Hz: 50 KW: 2.5 Amps: 10-10.5 |
| Specification | Sensor compatibility: Has a pocket for the high limit sensor or can be used with the hi limit ribbon style also Material spec: Required flow rate: Set by pressure switch Flow detection: 2-PSI Tecmark pressure switch |
| Compatible with: | HydroQuip 6000 series found in Gulf Coast, Sierra Spas, Southwest Spas and more. Also SSPA low end assembly including Sunrise Spas, LA Spas, Dimension 1 (home series), Coyote Spas, Hotspot by Hotspring and more |
| Connections / Fixings: | Usually held in with a double aluminum brace. Hi limit sensor pouch on underside. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | Commonly used with a Tecmark pressure switch. This heater may also have a label saying, Thermcore, Gecko, Hydroquip or another but if it looks the same it most probably is, contact us if you are unsure |
| Products categories | Spas, Hot Tubs, Portable |