Balboa Hot Tub Heaters
We stock a wide range of Balboa Hot Tub Heaters and replacement Heater Elements.
Full Description
Balboa 2.0KW Heater M7
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 2.0 Amps: 8.0-8.5 |
| Sp ecification | Sensor compatibility: M7 24" x 2 Material spec: Incoloy Required flow rate: 21gpm Flow detection: M7 Technology by using a sensor at each end of the heater assembly |
| Compatible with: | Duplex Value Pack, Super Duplex Pack, Spaform SF172, Catalina, Hydropool, Canadian Spa, Hyrdospa, Marquis Spa, Aegean, Leisurite, Leisure Bay, Signature Spas, Touch Spas, Hot Tubs Direct and more... |
| Connections / Fixings: | Usually held in with a double metal brace. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 2.0KW Heater with Pressure Switch
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 2.0 Amps: 8.0-8.5 |
| Specification | Sensor compatibility: Pre M7 double harness style Material spec: Incoloy Required flow rate: Set by pressure switch Flow detection: 2-PSI Balboa pressure switch |
| Compatible with: | Lite leader box, M3 TUV, Spaform SF100, Catalina, Hydropool, Canadian Spa, Hyrdospa, Marquis Spa, Aegean, and more... |
| Connections / Fixings: | Usually held in with a double aluminum brace. Hi limit sensor pouch on underside. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 2.0KW M7 Heater with Studs (GS-GL)
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
Power: | Volts: 230 Hz: 50 KW: 2.0 Amps: 8.0-8.5 |
| Specification | Sensor compatibility: M7 24" x 2 Material spec: Incoloy Required flow rate: 21gpm Flow detection: M7 Technology by using a sensor at each end of the heater assembly |
| Compatible with: | GS500, GS500Z, GS501, GS501Z (with 2.0KW on label only) |
| Connections / Fixings: | Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 3.0KW Heater M7
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 3.0 Amps: 11.5-12.0 |
| Specification | Sensor compatibility: M7 24" x 2 Material spec: Incoloy Required flow rate: 21gpm Flow detection: M7 Technology by using a sensor at each end of the heater assembly |
| Compatible with: | 2005 LE, Elite M7, Duplex Value Pack, Super Duplex Pack, GL2000 (old metal style), GL8000, Catalina, Hydropool, Canadian Spa, Hyrdospa, Marquis Spa, Aegean, Leisurite, Leisure Bay, Signature Spas, Spaform, Touch Spas, Hot Tubs Direct and more... |
| Connections / Fixings: | Usually held in with a double metal brace. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 3.0KW Heater M7 with Studs (GS-GL)
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 3.0 Amps: 11.5-12.0 |
| Specification | Sensor compatibility: M7 24" x 2 Material spec: Incoloy Required flow rate: 21gpm Flow detection: M7 Technology by using a sensor at each end of the heater assembly |
| Compatible with: | GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more |
| Connections / Fixings: | Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 3.0KW Heater with Pressure Switch
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 3.0 Amps: 11.5-12.0 |
| Specification | Sensor compatibility: Pre M7 double harness style Material spec: Incoloy Required flow rate: Set by pressure switch Flow detection: 2-PSI Balboa pressure switch |
| Compatible with: | Lite leader box, M3 TUV, Spaform SF100, Catalina, Hydropool, Canadian Spa, Hyrdospa, Marquis Spa, Aegean, and more... |
| Connections / Fixings: | Usually held in with a double aluminum brace. Hi limit sensor pouch on underside. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help. |
Balboa 5.5KW Heater Pressure Switch Style
| Type of product: | Heater assembly |
| Make and Model: | Balboa |
| Power: | Volts: 230 Hz: 50 KW: 5.5 Amps: 21-22 |
| Specification | Sensor compatibility: Pre M7 double harness style Material spec: Incoloy Required flow rate: Set by pressure switch Flow detection: 2-PSI Balboa pressure switch |
| Compatible with: | More commonly used with larger Swim Spas, Hydropool etc |
| Connections / Fixings: | Usually held in with a double aluminum brace. Hi limit sensor pouch on underside. 2" white plastic female sockets to connect to plumbing |
| Dimensions: | Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches |
| Additional notes: | You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. |
| Products categories | Spas, Hot Tubs, Portable |